Idk if this is the problem or im just really dumb because im just a newbie at this. If you notice in the above terminal output to the lsmod command, v4l2_compat_ioctl32 is what i assume to be my camera, its being used by videodev and videodev is being used by uvcvideo but uvcvideo, the driver i NEED to use is being use by nothing. Snd_page_alloc 18529 2 snd_hda_intel,snd_pcm Snd 67382 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec, snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,sn d_seq_device Snd_seq_device 14462 3 snd_seq_midi,snd_rawmidi,snd_seq Snd_seq 61621 2 snd_seq_midi,snd_seq_midi_event Snd_pcm 96625 3 snd_hda_intel,snd_hda_codec Snd_hda_codec 103804 2 snd_hda_codec_realtek,snd_hda_intel So if anyone could help, i would really appreciate lsmod anyway, so the drivers are definitely ls -l /dev/v4lĭrwxr-xr-x 2 root root 60 05:50 ls -l /dev/video*Ĭrw-rw-+ 1 root video 81, 0 05:50 /dev/video0 and still no, I'm trying to use the camera for an in-browser site called stickam. so i built the v4l device driver because my camera comes up as V4L2. now then, i looked up the list of supported devices for the uvc drivers and my camera is on there. I installed the v4l drivers and they installed perfectly and still it doesnt lsusbīus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hubīus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubīus 001 Device 002: ID 064e:a103 Suyin Corp.īus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub However, wireless charging will work without issues when only the Connex Case is attached.My webcam isnt working and i've done everything i could think of. If a user adds a Connex Card Holder or Connex Smart Stand to the Zenfone 10 Connex Case, there’s a chance of wireless charging being interrupted or not being detected due to the overall increased thickness.For related warranty information, please refer to the product warranty card. Please note that the device has a USB-C charging port, and this USB-C port must be completely dry before any attempt is made at charging. After the test the device is removed and fully dried, then checked for normal operation. Water resistance is tested by submerging the device to a depth of 1.5 meters in tap water for 30 minutes. Failure to observe correct precautions will invalidate the device warranty and the function of water and dust resistance. The device should never be completely submerged underwater, and should not be allowed to come into contact with seawater, brine, chlorinated water or drinks. Water and dust resistance can deteriorate over time in normal usage, or if the device is damaged, repaired or taken apart. The device has been tested for water resistance using IEC 60529 standard and has achieved an IP65/68 rating.Actual performance may vary depending on conditions. The data are based on typical end-user usage habits. Test results are compared to those of the Zenfone 9 and are provided by ASUS labs.Actual wattage may vary depending on conditions. HyperCharge supports 30-watt charging which requires use of the supplied ASUS charger.Therefore, the actual charging speed may vary and could be slower. The charging speed may be influenced by various factors, such as usage during charging, battery state of health, environmental temperature, or compatibility of charging equipment. When using wireless charging on the Zenfone 10, please ensure that the wireless charging has obtained Qi EPP certification, and the charger supports the QC 2.0 standard to achieve optimal charging speed. The wireless charging technology of the Zenfone 10 has a maximum power of 15W and is compatible with the Qi EPP standard.The typical battery capacity is 4300 mAh, while the rated battery capacity is 4150 mAh.The 144 Hz refresh rate can only be enabled in Game Genie while playing mobile games.Only supports zoom ratios between 4x to 8x.Uses pixel binning to output 8 MP image.Calculated by adopting new bio-based polycarbonate per kg.Bio-based polycarbonate is only used for the Eclipse Red, Comet White and Aurora Green models.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |